Determination of the point of zero charge of pineapple (Ananas comosus L.) peel and its application as copper adsorbent

##plugins.themes.bootstrap3.article.main##

Cintya Valerio Cárdenas
Jorge Martínez-Herrera
Diana Laura Velázquez-Vargas
Patricia De la Cruz-Burelo

Keywords

Pineapple peel, point of zero charge, copper adsorption

Resumen

Objective: To determine the optimum pH at which the pineapple peel can adsorb the greatest amount of copper.


Design/methodology/approach: Sorbent material. The size of the pineapple peel was reduced to 0.250 mm; it was chemically modified with 0.2 M NaOH and 0.2 M CaCl2. Point of zero charge (PZC). Six solutions were prepared with 0.5 g of sorbent in an aqueous medium (with a 3-8 pH range), they were stirred at 225 rpm for 48 h. The derivative method was used to plot the initial pH versus final pH, in order to determine the PZC. Copper adsorption. CuSO4 solutions were prepared in 2, 4, 6, 8 10 mg/L concentrations; 0.1 g of pineapple biomass was added adjusting the pH to 5. The solutions had a contact time of 0 to 24 h.


Results: The pineapple peel had a 5.0 point of zero charge (PZC) value, which indicates that pH values higher than the PZC are required to obtain an adsorbent with a negatively charged surface and favor the copper adsorption. A 50% copper removal was obtained in all concentrations after a 1 h contact time.


Limitations on study/implications: This research had no limitations.


Findings/conclusions: The point of zero charge is a reliable parameter that allows the adsorption process to take place and provides a greater certainty to the metal adsorption process. Meanwhile, pineapple peel can be used as an adsorbent material, consequently reducing its accumulation in open dumps.

Abstract 306 | EARLY ACCESS 6 Downloads 0

Artículos más leídos del mismo autor/a